Loading ...
Loading ...
Loading ...
DS-K1T8003 Series Fingerprint Access Control Terminal User Manual
9
Note
Reserve 5.2 mm to 5.5 mm of expansion bolts outside the wall for hanging the device.
Figure 4-4 Install Expansion Screws
4. Wire the device.
– If there is a cable hole on the wall, route the cables from the wall and connect them with the
interfaces on the device rear panel.
If there is no cable hole on the wall, connect the cables with the interfaces on the device rear
panel and make sure the cables will come out from the device bottom.
5. Align 4 holes of the device rear panel with the fixed screws and hang the device on the wall.
Figure 4-5 Install Device
Loading ...
Loading ...
Loading ...