Loading ...
Loading ...
Loading ...
DS-K1T8003 Series Fingerprint Access Control Terminal User Manual
30
5. Press ESC and save the settings.
Result
Enter the initial page, the current attendance mode will be displayed on the page. When you
authenticate on the initial page, the authentication will be marked as the configured attendance
status according to the configured schedule.
6.7.2 Set Manual Attendance
Set the attendance mode as manual, and you can select a status manually when you take
attendance.
Before You Start
Add at least one person, and set the person's authentication mode. For details, see Person
Management.
Steps
1. Move the cursor and select System → Att. Status to enter the Attendance Status page.
2. Move the cursor and select Attendance Mode and set the attendance mode as Manual.
Figure 6-14 Manual Mode
Note
Make sure the attendance status is enabled. By default, it is enabled.
3. Press ESC and save the attendance mode.
4. Move the cursor and select Shortcut Key and define the shortcut key's attendance status.
5. Press ESC and save the settings.
Result
Press a key on the keypad to select an attendance status and authenticate. The authentication will
be marked as the configured attendance status according to the defined shortcut key.
Or when you authenticate on the initial page, you will enter the Select Status page. Select a status
Loading ...
Loading ...
Loading ...