Hikvision DS-K1T8003F User Manual

Loading ...

DS-K1T8003 Series Fingerprint Access Control Terminal User Manual

Steps

1. Click Access Control → Advanced Function → More Parameters to enter the More Parameters

page.

2. Select a device from the left panel.

3. Click Attendance Status.

4. Set the attendance mode as Manual.

5. Make sure Attendance Status Required is enabled.

Note

By default, Attendance Status Required is enabled.

6. Set shortcut key from the drop-down list for the attendance status.

7. Click Save.

Result

Press a key on the device keypad to select an attendance status and authenticate. The

authentication will be marked as the configured attendance status according to the defined

shortcut key.

Or when you authenticate on the device initial page, you will enter the Select Status page. Select a

status to take attendance.

Note

If you do not select a status for about 20 s, the authentication will be failed and it will not be

marked as a valid attendance.

Set Auto Attendance

Set the attendance mode as auto, and you can set the attendance status and its available time

duration. The system will auto change the attendance status according to the configured

parameters.

Before You Start

Add at least one person, and set the person's authentication mode. For details, see Person

Management.