Loading ...
Loading ...
Loading ...
7
● Never modify the mower in any way.
● Use the machine only in daylight or with good artificial lighting.
● It is recommended to program the product for use during hours when the area is free from activity.
● The product must never be allowed to collide with persons or other living creatures. If a person or
other living creature comes in the way of the product, it shall be stopped immediately.
● Do not put anything on top of the product or its charging station.
● Do not allow the product to be used with a defective guard, blade disc or body. Neither should it be
used with defective blades, screws, nuts or cables. Never connect a damaged cable, or touch a
damaged cable before it is disconnected from the supply.
● Always switch off the product when it is not in use.
● Check all visible fixing screws and nuts especially on the cutter disc, to ensure they are tightened
properly.
● Before using the mower and after any impact, check for signs of wear and damage and repair or
replace as necessary.
Electrical safety:
Grounding instructions
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least
resistance for electric current and reduces the risk of electric shock. This tool is equipped with an
electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST be
plugged into a matching outlet that is properly installed and grounded in accordance with ALL local
codes and ordinances.
DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the outlet, have the proper outlet
installed by a licensed electrician.
IMPROPER CONNECTION of the equipment grounding conductor can result in electric shock. The
conductor with the green insulation (with or without yellow stripes) is the equipment grounding
conductor. If repair or replacement of the electric cord or plug is necessary, DO NOT connect the
equipment grounding conductor to a live terminal.
CHECK with licensed electrician or service personnel if you do not completely understand the
grounding instructions, or if you are not sure if the tool is properly grounded.
USE ONLY THREE-WIRE EXTENSION CORDS that have 3-pronged plugs and outlets that accept
the tool's plug as shown in Fig. A. Repair or replace a damaged or worn cord immediately.
CAUTION: In all cases, make certain the outlet in question is properly grounded. If you are not sure if
it is, have a licensed electrician check the outlet.
● Make sure that the mains voltage matches the details on the type plate.
● Avoid body contact with earthed or grounded surfaces, such as pipes. There is an increased risk of
electric shock if your body is earthed or grounded.
Loading ...
Loading ...
Loading ...