Loading ...
Loading ...
Loading ...
12
ASSEMBLY INSTRUCTIONS
Assembling And Positioning The Charging Station
1. Place the charging unit(22)with the two lugs first into the base plate (21) of the charging station.
2. Press the charging unit(22) down so that it is firmly seated in the base plate.
3. Fix the charging unit(22) from below to the base plate(21)with the four enclosed screws (19).
4. Select a flat position near an outlet for the charging station(17) with at least 2 m of space in front and
1 m behind. Don’t peg the charging station down before you find a location with access to power.
CAUTION: Trailing wires are a trip hazard. Take care when choosing your location.
The location of the charging station should be flat and secure, without risk of movement, if
placed next to a border edge that is unstable it can slump and cause the station to be uneven,
this will cause problems for the mower when returning to charge.
The location of the charging station must have a safe power source – either a weatherproof outdoor
electrical socket or an indoor power point in a garage, for example.
CAUTION: Make sure that the charging station (17) is positioned an adequate distance away
from ponds, pools and steps.
Install The Boundary Wire
Before starting up the lawn mower, the boundary wire (11) must be placed around the lawn area to be
covered by the automatic lawn mower. You can do this as follows:
● Mark out the lawn area with the hooks (13).
● Bury the boundary wire (11) in the ground (depth of 1~15cm).
● The perimeter wire must be kept tight. If it is loose it may well end up being cut by the mower as it
passes over it.
● If the wire passes over a moderate dip in the lawn, more hooks will be required to keep the wire
firmly pegged at ground level, or it risks being cut.
CAUTION: The lawn mower crosses over the boundary wire by about 20~30 cm before it
turns around and searches for a new path, install the boundary wire accordingly to prevent
damage. For the initial installation, we recommend marking out the boundary wire (11) with the
hooks (13) in case corrections need to be made at a later date.
22
21
17
19
19
Min 2m
Min 1m
13
11
Loading ...
Loading ...
Loading ...