Loading ...
Loading ...
Loading ...
20
Setting / Deleting a Schedule
Setting a schedule
1. Open the cover (1).
2. Unlock the display (10) with the 4-digit-PIN. Press the OK button (7) to enter the main menu.
3. Use the arrow buttons (6) to select “Schedule”. Confirm the selection with the OK button (7).
4. Select the day you want to set (Mon, Tue, Wed, Thu, Fri, Sat, Sun) with the arrow buttons (6). Press
the OK button (7) to enter the day setting. Two mowing time periods can be set per day.
5. Select the start and end time with the arrow buttons (6). Press the OK button (7) to confirm and the
selection returns to the left of the day.
NOTE: If you only want to set a mowing period, return to the day or to the main menu with the back
button (5).
6. Repeat the step 5~8 to select the schedule period for each day of the week. Press the OK button (7) to
confirm the result of this setting.
Deleting a schedule
1. Move the selection with the arrow button (6) to “Alle” (top left).
2. Press and hold the back button (5) to delete the entire schedule for the week.
Setting Secondary Areas
1. If necessary, open the cover (1).
2. Unlock the display (10) with the 4-digit-PIN. Press the OK" button (7) to enter the main menu.
3. Use the arrow buttons (6) to select “Secondary areas”. Press the OK button (7) to select a secondary
area (areas). Select the starting distance “Distance (dst) m” and
the ratio “Percent (pct)%” of the area to be mowed with the
arrow buttons (6) and press the “OK” button (7) to confirm.
After the selection, you automatically return to the overview of
the secondary areas.
4. Repeat step 3 to complete the setting of each secondary area
(Areas). Press the OK button (7) to confirm the result of the
setting.
NOTE: The distance “Distance (dst)m” represents the walking
distance along the boundary when the device leaves the station
The “Percent (pct)%” represents the probability of the device entering the area.
You can set up to 5 zones in your garden but the sum of the “Percent (pct)%” indication of the 5
secondary area (Areas) must be less than /equal to 100%.
Restoring Factory Settings
The lawn mower can be reset to factory settings here.
1. If necessary, open the cover (1).
2. Unlock the display (10) with the 4-digit PIN. Press the OK button (7) to enter the main menu.
3. Use the arrow buttons (6) to select “Setting”. Confirm the selection with the OK button (7).
4. Use the arrow buttons (6) to select “Factory set”. Confirm the selection with the OK button (7).
NOTE: The lawn mower switches off and resets itself to the factory setting.
Resetting the lawn mower to factory settings does not delete the persona data saved when connecting
to the Smart Life App. To delete this data, proceed as described in the chapter “Disconnecting the
device and deleting data from the app”.
50%
20%
30%
Loading ...
Loading ...
Loading ...