Loading ...
Loading ...
Loading ...
23
Explanation of the (status) messages on the display
Text in control panel
Explanation
Standby
Lawn mower is in standby mode, there are no error messages.
Input PIN
Prompt to enter the PIN.
Charging
Lawn mower charges.
Mowing
Lawn mower mows.
Auto mowing
Lawn mower mows automatically.
Spot mode
Lawn mower mows a defined area.
Fix point mowing finished
Mowing completed in “spot mode”.
Returning
Lawn mower on the way back to the charging station.
Paused
Lawn mower in pause state triggered by:
-pressing the STOP button.
-pressing the “Pause” button on the APP.
Emergency stop
The STOP button (9) has been pressed.
Charge to work
Lawn mower charges.
Updating
Perform firmware necessary/in progress.
Low battery, charge to
work
The charge level of the battery does not meet the minimum
requirements at the start of work:
70% for automatic mowing.
30% for fixed point mowing (spot mode).
Raining now, returning
The rain sensor has been activated.
Close cover to start
Request to close the cover (1), close it.
Charge to work paused
Charging was interrupted (e.g. manually or due to a power failure).
Work interrupted, please
retry
Automatic mowing was interrupted(e.g. STOP button (9) was
pressed; The cover (1) was opened).
Place inside the boundary
and retry
Request to place the lawn mower inside the boundary wire.
Continue working
Press the OK button (7) to continue the work or press the Back
button (5).
Time set wrong
Correct times.
Charge to work paused
Charging process was interrupted, cause to be checked on site.
Current work was stopped
Work process was interrupted, check cause in site.
Low battery voltage
The charge level of the battery does not meet the minimum
requirements at the start of work:
70% for automatic mowing.
30% for fixed point mowing (spot mode).
Place the the lawn mower in the charging station, or to wait for the
charging process to finish, or the lawn mower returns to the
charging station independently.
Low battery, charge to
work
Low battery voltage, return
to station
No loop signal
Check correct installation of the boundary wire and correct if
necessary, place the lawn mower inside the boundary and restart
it .
No signal, please set up the
loop first
Loop signal lost
Mower was locked!
Waiting...
Wait until the current running process is completed.
Wrong PIN, kindly retry
Enter the PIN again.
Place inside the boundary
and retry
Place the lawn mower inside the boundary and restart it.
Mower outside
Loading ...
Loading ...
Loading ...