Loading ...
Loading ...
Loading ...
29
MAINTENANCE
WARNING: Before any maintenance or cleaning work, switch off the device and wait for
the blades to come to a standstill. Handle your device with care. Keep the tools sharpened
and clean in order to be able to work better and safer. Follow the maintenance instructions.
General Cleaning And Maintenance Work
● Keep the device clean.Check and clean mower regularly once a week. Use a brush or cloth for
cleaning, but do not use any aggressive cleaning agents or solvents.Never spray down the lawn
mower with water. There is a risk of electric shock.
● Oil the wheels from time to time.
● Make sure that all nuts, bolts and screws are properly tightened, and that the device is in safe
working order.
● Wear gloves when handing the blades. Ensure that only replacement cutting tools approved by the
manufacturer are used.
● Inspect the lawn mower for any damage. Check the covers and protective devices for damage and
correct fit. Have any necessary repairs carried out on damaged parts. Replace these if necessary.
● Do not try to repair the device by yourself unless you have professional training. All work not
mentioned in these instructions may only be performed by authorized service representatives
commissioned by us.
● When you first start using the mower, the blade plate, protections plate and blade should be
checked once a month.
● Blade edges should not be damaged. Blade life depends on the type of grass, soil, lawn etc.
Replace worn or damaged parts in the interests of safety. When setting up the blades, take care that
your fingers do not become caught between the rotating blades and stationary parts of the
machine.
● Working with dull blades gives a poor mowing result, which needs more power to mow, meaning
the mower covers a smaller area at a time. Change the blades if necessary.
● Charge the battery fully at the end of the season before winter storage. If storage time is longer
than one year you will need to recharge the mower before use.
Turning / Replacing The Blades
The lawn mower is equipped with reversible blades. If the blades are blunt on one side, they can be
turned over. If the blades are damaged or show signs of imbalance, they need to be replaced (see
“Spare parts/accessories”).
1. Turn the device over.
2. Remove blade bolts (34) on the underside of the device.
Turning the blades
3.1. Turn the blades (20) over.
4.1. Refasten blades with the blade bolts(34).
Replacing the blades
3.2. Remove the old blades (20).
4.2. Refasten the new blades (20) with the blade bolts (34).
Loading ...
Loading ...
Loading ...