Loading ...
Loading ...
Loading ...
15
Connecting The Charging Station To The Power Adapter
1. Connect the power adapter (14) to the charging station (17) via the charging plug (16) and the
charging socket (25).
2. Screw the bushing (24) around the joint to protect it from moisture.
Fixing The Charging Station
CAUTION: The location of the charging station should be flat and secure, without risk of
movement, if placed next to a border edge that is unstable it can slump and cause the station to
be uneven, this will cause problems for the mower when returning to charge.
1. Secure the charging station and the charging station bumper
(18) with the fixing nails (12).
2. The charging station bumper (18) is fastened to the side of
the charging station outside the restricted lawn area.
3. The operating range indicator (31) on the charging station
must be located within the restricted lawn area.
Inserting / Replacing The Battery
CAUTION: When replacing the battery: Switch off the device and wait for the blades to come
to a stop. There is a risk of personal injury.
CAUTION: There is a risk of injury from leaking battery fluid if the battery is damaged! In
case of contact with eyes or skin, rinse the affected sites with water or a neutralizer and seek
medical attention.
1. Turn the lawn mower over.
2. Open the battery compartment (32) by removing the four screws on
the underside of the device.
3. If necessary, remove the empty battery (33).
4. Insert a charged battery.
5. Close the battery compartment (32) again.
Loading ...
Loading ...
Loading ...