Loading ...
Loading ...
Loading ...
17
● It loses the boundary wire signal and does not find it again within 5 minutes.
● It crosses the boundary wire when mowing.
● It gets stuck between obstacles and needs more than 10 seconds to find a way out.
● It is raised.
Setting The Cutting Height
WARNING: Switch off the device and wait for the blades to come to a stop. There is a risk of
personal injury.
1. Open the cover (1).
2. Set the rotary wheel (2) to the desired cutting height.
3. Close the cover (1) again.
NOTE:The device can be adjusted in 8 steps to a cutting height between 1~2.4inch, The correct
cutting height is between 1.2inch and 1.8inch for an ornamental lawn and about 1.2 to 2.4inch for a
utility lawn.
A high cutting height should be selected for the first cuts in the season.
Auto Mowing
1. Open the cover (1). Unlock the display (10) with the 4-digit PIN.
When the lawn mower is in the charging station or charging:
2.1. Press the START button (3) once.
- If the battery charge level is more than 70%, the display shows “Close the cover to start”. Close the
cover (1) and the mower will start mowing automatically.
- If the battery charge level is less than 70%, the display shows “Low battery” after 2 seconds. The
lawn mower charges until the battery charge level is 90% and then starts mowing automatically.
When the lawn mower is in standby state:
2.2. Press the START button (3) once.
- If the battery charge level is more than 30%, the display shows “Close the cover to start”. Close the
cover (1) and the mower will start mowing automatically.
- If the battery charge level is less than 30%, the display shows
“
Low battery” after 2 seconds. The
lawn mower moves to the charging station.
Spot Mode/Fixed Mowing
1. Place the mower on the target area of the lawn.
2. Open the cover (1).
3. Unlock the display (10) with the 4-digit-PIN. Press the OK button (7) to enter the main menu.
4. Select “Spot mode” with the arrow button (6). The display shows “Close the cover to start”.
5. Close the cover (1) and the mower starts mowing with the fixed point.
NOTE: The lawn mower mows in an anti-clockwise spiral direction and switches to “Automatic
mowing” after a mowing radius of 1 m or 3.5 minutes of mowing.
● If the mower encounters an obstacle, the mower stops, the display indicates the mowing has
stopped and the mower switches to standby mode. When the lawn mower hits the boundary wire
(11), it continues mowing in the opposite spiral direction.
Loading ...
Loading ...
Loading ...