Loading ...
Loading ...
Loading ...
DS-6700HUHI-K Series Encoder User Manual
55
7.1.3 Configuring Alarm Output
Steps:
1. Go to Configuration> Event > Basic Event > Alarm Output to enter the Alarm Output Settings page.
Figure 7. 9 Motion Detection-Alarm Output Settings
2. Select the Alarm Output No.
3. Set the Delay time to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or Manual. The Delay refers to the time
duration that the alarm output remains in effect after alarm occurs.
If you choose Manual, you need to manually disable the alarm output.
4. Click Arming Schedule tab to set the arming schedule for the alarm input. Please refer to Step 6 in Chapter
7.1.1 Configuring Motion Detection.
5. (Optional) Click Copy to to copy your settings to other alarm outputs.
6. Click Save to save the settings.
7.1.4 Configuring Video Loss Alarm
Steps:
1. Go to Configuration> Event > Basic Event > Video Loss to enter the video loss alarm setting page.
Loading ...
Loading ...
Loading ...