Loading ...
Loading ...
Loading ...
DS-6700HUHI-K Series Encoder User Manual
37
• NO-IP:
(1) Enter the Server Address as www.noip.com.
(2) Enter the Domain you registered.
(3) Enter the User Name and Password.
(4) Confirm the password.
(5) Click Save and then you can view the camera with the domain name.
Figure 5. 14 NO-IP Settings
Reboot the device to make the settings take effect.
5.3.4 Configuring PPPoE Settings
Your device also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
Steps:
1. Go to Configuration > Network > Basic Settings > PPPoE Settings to enter the PPPoE settings page.
Figure 5. 15 PPPoE Settings
2. Check Enable PPPoE checkbox to enable this feature.
3. Enter the User Name and Password, and confirm the password for PPPoE access.
The user name and password should be assigned by your ISP.
Loading ...
Loading ...
Loading ...