Loading ...
Loading ...
Loading ...
DS-6700HUHI-K Series Encoder User Manual
31
5.2.2 Configuring Time Settings
Steps:
1. Click Configuration > System > System Settings > Time Settings to enter the Time Settings interface:
Figure 5. 3 Time Settings
2. Select the Time Zone that is closest to the device’s location from the drop-down menu.
3. Configure the time synchronization by NTP server or by manually.
Configuring Time Sync by NTP Server
A Network Time Protocol (NTP) Server can be configured on your device to ensure the accuracy of system
date/time.
If the device is connected to a Dynamic Host Configuration Protocol (DHCP) network that has time server
properties configured, the camera will synchronize automatically with the time server.
Enable the NTP function by clicking the radio button, and configure the following settings:
Server Address: IP address of NTP server.
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions with NTP server. It can be set from 1 to 10080
minutes.
Figure 5. 4 Time Sync by NTP Server
Loading ...
Loading ...
Loading ...