Loading ...
Loading ...
Loading ...
DS-6700HUHI-K Series Encoder User Manual
35
Default Gateway, MAC Address, and MTU settings.
The valid value range of MTU is 500 to 1500.
3. If the DHCP server is available, you can check DHCP to automatically obtain an IP address and other
network settings from that server.
4. If the DNS server settings are required for some applications (e.g., sending email), you should properly
configure the Preferred DNS Server and Alternate DNS Sever here. Or check Auto DNS to automatically
obtain the IP address.
Figure 5. 10 DNS Server Settings
5. Click the Save to save the above settings.
5.3.2 Configuring Port Settings
Purpose:
You can set the port No. of the encoder, e.g., HTTP port, RTSP port and HTTPS port.
Steps:
1. Go to Configuration > Network > Basic Settings > Port to enter the Port Settings page.
Figure 5. 11 Port Settings
2. Set the HTTP port, RTSP port, HTTPS port, and Server Port 8000 of the camera.
HTTP Port: The default port number is 80.
RTSP Port: The default port number is 554.
HTTPS Port: The default port number is 443.
Server Port: The default port number is 8000.
3. Click Save to save the settings.
It will ask you to reboot the device to activate the settings.
Loading ...
Loading ...
Loading ...