Bosch MUM9B34S27 Keukenmachine

Gebruiksaanwijzing - Page 32

For MUM9B34S27.

PDF File Manual, 176 pages, Read Online | Download pdf file

MUM9B34S27 photo
Loading ...
Loading ...
Loading ...
en first time
32
2. To change the distance, turn the
tool.
→Fig.
4
Observe the values in the table:
Setting Distance
Optimum set-
ting
3mm
One turn clock-
wise
1mm more
One turn anti-
clockwise
1mm less
3. Press the release button and push
the swivel arm down until it en-
gages.
4. Check the setting.
5. Press the release button and raise
the swivel arm until it engages.
6. Hold the beating whisk at the bot-
tom with one hand and tighten the
lock nut anticlockwise using a
spanner wrench.
5.5 Safety systems
You can find an overview of your ap-
pliance's safety systems here.
Start lock-out
Start lock-out prevents your appli-
ance from being switched on acci-
dentally.
The appliance can only be switched
on and operated if
¡ the swivel arm is engaged in posi-
tion1 and the bowl is inserted.
¡ the swivel arm is engaged in posi-
tion1 and the bevel gear is fitted
on the main drive.
Restart lock-out
Restart lock-out prevents your appli-
ance from automatically restarting
processing after a power failure.
The appliance is switched on again
after a power failure. Processing can-
not start again until the rotary switch
has been set to
⁠.
Overload protection
The overload protection system pre-
vents the motor and other compon-
ents from being damaged through
being overloaded.
The motor will switch off if
¡ too large a quantity is processed.
¡ processing is taking too long.
¡ a tool or accessory is blocked.
Swivel arm protection device
The swivel arm protection device pre-
vents the swivel arm from being
opened if an accessory is attached to
the rear drive.
first time
6 Before using for the
first time
first time
Prepare the appliance for use.
6.1 Preparing the appliance
1. Press the release button and raise
the swivel arm until it engages.
→"Opening swivel arm", Page33
2. Turn the bowl clockwise and re-
move.
→"Removing bowl", Page33
3. Clean all parts that come into con-
tact with food before using for the
first time.
→"Cleaning and servicing",
Page35
4. Put the cleaned and dried parts
out ready for use.
Loading ...
Loading ...
Loading ...