Loading ...
Loading ...
Loading ...
4
WARNING: Accessible parts may become hot during use. Young children should be kept away.
19. Cleaning may only be commenced on the appliance once it has cooled down and is turned off. Failure
to clean properly can damage the unit. Do not use a steam jet or any other high pressure cleaning
equipment to clean the appliance.
20. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass surface as they can
scratch the surface, which may result in the glass shattering. Clean the glass using a w arm damp
cloth (e.g. dishcloth).
21. When the appliance is not being used, the knobs must be kept in the ‘OFF’ position.
22. The appliance must be installed and put into operation by an authorised person under the conditions
provided by the manufacturer in this manual. The manufacturer cannot be held responsible for any
damage that might occur due to faulty installation. Do not modify this appliance.
23. Use the anti-tilt kit to prevent the appliance from accidentally falling over.
24. Only use the temperature probe recommended for this oven.
25. Danger of fire: Do not store items on the cooking surface
CAUTION: The cooking process has to be supervised. A short term cooking process has to be
supervised continuously.
WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in a fire.
26. - The oven must not be installed behind a decorative door in order to avoid overheating.
LOCAL AUTHORITY REQUIREMENTS
Before installation, unpack all parts from carton, remove all internal packaging and transit protection where
present and check for damage. Check Gas Type and specifications plate placed on the rear of the unit,
alternatively there is a second label supplied. All gas fitting work, service and repairs can only be performed
by an authorised person in accordance with AS/NZS 5601 and local gas regulations. Failure to comply with
this condition will void the warranty. Always unplug the appliance before carrying out any maintenance
operations or repairs. The walls of the units must not be higher than worktop and must be capable of
resisting temperatures of 65⁰ K ( 65°C Above Amb.Temp. ) or if this appliance is installed near vinyl wrapped
surfaces, use an installation kit available from the vinyl-wrap supplier. Bertazzoni cannot accept any
responsibility for damage caused due to installation into cabinets with low temperature tolerances. Do not
install the appliance near flammable materials (eg. curtains). The final act of any installation or gas type
conversion must be the full testing of this appliance, which includes leak testing, ignition of each burner and
the functionality of the burners separately and together.
Keep all the dangerous packing parts (polystyrene foam, bags, cardboard, staples, etc.) away from children.
Any walls of the adjacent furniture pieces and the wall behind the cooker must be made of heat-resistant
material that can withstand a minimum temperature of 65° K ( 65°C Above Amb.Temp. )
Loading ...
Loading ...
Loading ...