Loading ...
Loading ...
Loading ...
28
To remove the Oven Shelf Support, remove the top and bottom screws shown below and then pull the support from the
holes in the rear oven wall. Repeat for opposite side. Replace in reverse procedure.
OVENS
Using the electric The maximum oven temperature can vary according to the tolerances of the different
thermostat materials and installation conditions between 220-250°C.
The thermostat supplied with the relative models maintains a constant temperature
inside the oven at a specific temperature setting ranging from 50°C to 250°C (Fig.
39-40 and Fig.41 for pro t version only ) or 50°C to T max°C for hybrid version
only (Fig.42-43). Turn the knob clockwise and align the selected temperature
indicated on the ring with the index etched on the control panel. Thermostat operation
is indicated by an orange light which will turn off when the temperature inside the oven
is 10°C greater than the temperature setting, and will turn on when the oven is 10°C
less than the temperature setting. The thermostat can control the oven elements only
if the relative switch is in one of the possible oven element operating modes: if the
switch is in position 0, the thermostat has not effect on the oven elements, which
remain off.
Fig 39 Fig 40 Fig 41
Fig.42 Fig.43
Using the electric oven Before using the ovens for the first time:
- Remove all packaging and accessories from inside the ovens.
- Heat the ovens to 200°C for
½ hour to burn off
manufacturing residues.
- The automatic programmer must be set to Manual mode for ordinary cooking.
- The oven will not function when set in Automatic mode. See page 32.
To use the ovens:
1
Turn the function selector knob (Fig.44 -45 and Fig.46-47) clockwise to the desired
function.
The orange light will illuminate, indicating that the element is on.
Loading ...
Loading ...
Loading ...