Loading ...
Loading ...
Loading ...
18
APPLIANCE USE AND MAINTENANCE
ATTENTION: Important Warnings.
• For cookers resting on base
ATTENTION: if the cooker rest on a base, take the measures necessary to prevent the cooker from sliding
along the support base.
• For cookers with electric ovens
ATTENTION: The unit becomes hot during use. Do not touch the heating elements inside the oven.
ATTENTION: The accessible parts can become hot during use. Keep children away from the appliance.
• For glass doors
ATTENTION: Do not use harsh abrasive cleaning products or metal spatulas with sharp edges to clean the
oven door’s glass since this could scratch the surface and the glass could break.
• For gas cooktops
ATTENTION: Clean burner tops and trivets at least once a week, or after any spillage. Gas inlet pipes
should be checked periodically for leakages (see section on leak testing), at intervals not exceeding 12
months. Lubrication of valves should only be performed by an authorised person, and is required if the
gas control knobs become stiff and difficult to turn.
Do not use steam cleaner to clean the appliance.
WARNING: DO NOT MODIFY THIS APPLIANCE Please maintain your appliance regularly.
REPLACING PARTS
Before performing any maintenance operations, disconnect the appliance from the g
a s supply and electricity network.
To replace parts such as knobs and burners, just remove them from the seats without
dis assembling any part of the cooker.
To replace parts such as nozzle supports, valves and electric components follow the
procedure described in the burner adjustment paragraph. To replace the valve or the
gas thermostat, it is also necessary to disassemble the two rear gas train brackets,
loosening the 4 screws (2 per bracket) that attach it to the rest of the cooker and,
unscrew the nuts that attach the front burner valves to the control support, after
removing all the knobs. To replace the gas or electric thermostat, also disassemble
the rear cooker guard, loosening the relative screws, to be able to pull down and
reposition the thermostat bulb.
To replace the oven bulb, just unscrew the protection cap that projects out inside the
oven (Fig.22)
Fig.22
WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the
possibility of electric shock.
WARNING: The power cord supplied with the appliance is connected to the appliance with an X type
connection (in compliance with standards AS/NZS 60335-1, AS/NZS 60335-2-6 and subsequent
amendments) for which it can be installed without the use of special tools, with the same type of cord as
the one installed.
If the power cord becomes worn or damaged, replace it based on the information reported in table 2. To
replace the power cable, lift the terminal board’s cover and replace the cable.
Loading ...
Loading ...
Loading ...