Loading ...
Loading ...
Loading ...
Cleaning and care
163
Never put HydroCleaner in the water
container.
Cleaning agent residues can get into
the steam generator.
Only pour HydroCleaner through the
floor filter.
Check that the floor filter is fitted cor-
rectly.
Pour the entire contents of 1bottle of
HydroCleaner through the floor filter.
Make sure that no cleaning agent
gets onto the door glass or seal.
Confirm with OK.
Close the door.
The cleaning process begins.
The time left appears on the display.
The door will lock automatically a few
seconds after the process has started.
Tip: You can display the approximate
time before actions need to be per-
formed again, e.g. wiping out the oven
compartment, by pressing Info.
Before the drying phase starts, the door
is unlocked again and you are promp-
ted to wipe the oven compartment and
the inside of the door with a damp
cloth:
Wipe the oven compartment (includ-
ing underneath the floor filter) and the
inside of the door thoroughly with a
clean, damp microfibre or absorbent
cloth.
Confirm with OK.
To ensure that the combination steam
oven is working at its best, check the
drip channel and remove any water if
necessary.
Damage due to leaking water.
Leaking water can damage the hous-
ing unit and the floor.
If there is water in the drip channel,
check that the door seal is fitted cor-
rectly.
If necessary, press the door seal in
all the way round the door to make
sure it is installed snugly and evenly.
In very adverse circumstances, water
may have accumulated in the drip
channel up to the height of the plat-
eaus:
If this happens, contact the Miele
Customer Service Department.
Raise the top heat/grill element (see
“Lowering the top heat/grill element”).
Insert the side runners (see “Cleaning
the side runners”).
Place the accessories in the oven
compartment.
Confirm with OK.
Close the door.
Once the time left has elapsed, Finished
appears on the display and a buzzer
sounds.
Loading ...
Loading ...
Loading ...