Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 89
Description: Set the output ON delay to 3 seconds
Command format: [:SOURce]: OUTPut:ON:DELay? <channel>
Description: Obtain the delay time of the selected channel's output ON
E.g: OUTPut:ON:DELay?
Response:4.000000\n
Set output OFF delay
Command format: [:SOURce]: OUTPut:OFF:DELay <channel>,{<value> | MINimum | MAXimum |DEFault}
Description: Set the delay time for output OFF of the selected channel
E.g: OUTPut:OFF:DELay CH1,1
Description: Set output OFF delay less than 1 second
Command format: [:SOURce]: OUTPut:OFF:DELay? <channel>
Description: Obtain the delay time of output OFF of the selected channel
E.g: OUTPut:OFF:DELay?
Response: 3.000000\n
Set the output enable state of the channel
Command format: [:SOURce]: OUTPut:OFF:DELay <channel>,{ON | OFF | 0 | 1}
Description: Set the channel output enable state of the selected channel (ON | OFF |
0 | 1)
E.g: OUTPut:SET:ON:STATe CH1,1
Description: Set CH1 output enable on
Command format: [:SOURce]:OUTPut:SET:ON:STATe? <channel>
Description: Get the channel output enable status of the selected channel
E.g: OUTPut:SET:ON:STATe? CH1
Response: 1\n
Set external output enable state
Command format: [:SOURce]:OUTPut:LOCAL:Enable <channel>,{ON | OFF | 0 | 1}
Description: Set the external output enable state of the selected channel (ON | OFF |
0 | 1)
E.g: OUTPut:LOCAL:ENable CH1,0
Description: Set CH1 channel to external control mode
Loading ...
Loading ...
Loading ...