Siglent SPS5045X 40V/30A/360Wx3 Three Channel Switch Mode Power Supply

Manual - Page 44

For SPS5045X.

PDF File Manual, 106 pages, Read Online | Download pdf file

SPS5045X photo
Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 43
Switch On / Off and Output Port
Connect the Power Cord
Type I / type II / type IV supplies have a power interface with a 10 A input port: use the power
cord provided to connect to the socket on the rear panel.
Type III / type V supplies have the following power cord connection method:
1) Turn off the power switch;
2) Connect the AC input terminal to the AC power cord;
Black/Brown: The live/hot wire, connected to port L.
Green/Green-yellow: The ground wire is connected to the terminal with a grounding mark
.
White/Blue: The neutral/zero line, connected to port N.
3) Install the protective cover.
Power On
The SPS5000X is powered on manually. After the power is connected to the AC power
source through the power cord, manually press the power button to start the instrument and
enter the boot interface.
When the switch is in 1 state, it means that the switch is on. At this time, if there
is sufficient AC power from MAINS, the power supply is in the on state.
American Standard
European standard
Back view
Loading ...
Loading ...
Loading ...