Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 69
ON
OFF
1#
SPS5000X
2#
SPS5000X
3#
SPS5000X
4#
SPS5000X
T1_ON_Delay
T1_OFF_Delay
T2_ON_Delay T2_OFF_Delay
T3_ON_Delay T3_OFF_Delay
T4_ON_Delay
T4_OFF_Delay
Set Internal Resistance
Setting method: Menu → 2.Configure → 5.Output resistance Enter the setting
interface. Press the knob to display the cursor. Press the key to switch the digit where
the cursor is located. Turn the knob to increase or decrease the value. After the setting is
completed, you need to press the knob to confirm it to take effect.
Different types of power supplies can be set with different internal resistance values, see the
previous chapter 6.5 for details.
Set Measurement Accuracy
The SPS5000X has three measurement accuracy modes to choose from: Low, Mid and
High. When Low is selected, the measurement rate is the fastest but has less accuracy.
High is the slowest measurement, but more accuracy. High is selected by default.
Setting method: Menu → 2.Configure → 6.Measure average to enter the setting
interface. Press the knob in the interface, turn the knob to switch the cursor, press the knob
to confirm and the setting takes effect.
Loading ...
Loading ...
Loading ...