Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 48
Basic Operation
This chapter will introduce the functions and operation methods of the control panel of
SPS5000X in detail so that you can have a more comprehensive understanding of the
SPS5000X for better work.
Before using the product, it is necessary to confirm that the product can work and output
normally. Confirmation steps: Power Off → Normally connect the sense sheet and the output
terminal is not wired → Install the shell, Power On and Restore Default → Set 5V 0.5A and
output→ Make sure the working mode is CV and the voltage readback value is between
4.075V and 5.025V → Power Off and Short circuit output → Install the shell and Power On
→ Make sure the working mode is CC and the current readback value is between 395mA
and 605mA.
System Settings
View Version Information
Operation method: Press menu → 1.System → 1.Version on the panel to call up
the system information interface.
The information that can be viewed on the interface includes: Boot times, vendor name,
model, product specification, serial number, host version, and slave version.
System Upgrade
Please follow the steps below to upgrade the firmware:
1) Download the firmware upgrade package from the official website.
2) Copy the .ADS file in the upgrade package to the root directory of the U disk(FAT32).
3) Insert the USB flash disk into the USB port of the front panel.
4) Press Menu → 1.System → 4.Upgrade on the front panel, and select the upgrade file.
5) Press the button to confirm. The upgrade progress bar will pop up. After the upgrade is
successful, it will restart. If it fails, a prompt box will pop up.
Any operation that interrupts the upgrade process may cause upgrade failure or even the
Loading ...
Loading ...
Loading ...