Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 77
Communication interface settings
◆ USB
USB cannot be edited, only viewing operations can be performed.
Operation method: Menu → 3.Communication → 1.USB . After entering the
interface, you can view the resource information of the USB device.
◆ GPIB
Setting method: Menu → 3. Communication → 2. GPIB enters the setting
interface, press the knob to display a cursor, turn the knob to change the value, and
press the knob to make the setting effective.
◆ LAN
SPS5000X supports DHCP function, users can set to obtain IP automatically or set IP
manually. You can set the DHCP switch, IP address, gateway address, and subnet mask
address.
Setting method: Menu → 3. Communication → 3.LAN to enter the LAN setting
interface. Press the knob to display the cursor position, press to move the cursor
position up and down. When is displayed, it means that the selection is
On, turn the knob to switch On/Off, and press the knob to confirm the effect. When
is displayed, it means that DHCP is set to On, and the IP is automatically
obtained at this time.
If you want to set the IP manually, first set DHCP to Off according to the above method.
After pressing the knob, press the key to move the cursor up and down, press
the key to move the cursor left and right, turn the knob to change the value, and
press the knob to confirm the setting takes effect.
Loading ...
Loading ...
Loading ...