Loading ...
Loading ...
Loading ...
42
3. Ice Purge Cycle Bypass
To speed up the diagnostic process, the 5-min. ice purge cycle may be bypassed
by pressing the "SERVICE" button on the control board after the gear motor starts.
WARNING! Risk of electric shock. Care should be taken not to touch live terminals.
B. Controls and Adjustments
NOTICE
Dip switches are factory set. Failure to maintain factory settings may adversely
affect performance and warranty coverage. For more information, contact your
Hoshizaki Certied Service Representative.
1. Default Dip Switch Settings
The S1 dip switch settings are factory-set to the following positions:
a) Single Bin Control Models (BC Mech. Stand-Alone or BC2 Backup Only)
Dip Switch No. 1 2 3 4 5 6 7 8 9 10
F-1001M_H(-C) OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
F-1001M_J(-C) OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
b) Multiple Bin Control Models (BC1 Infrared Sensor and BC2 Backup)
Dip Switch No. 1 2 3 4 5 6 7 8 9 10
F-1501M_H(-C) ON OFF OFF OFF OFF OFF ON ON OFF OFF
F-2001M_H(3)(-C) ON OFF OFF OFF OFF OFF ON ON OFF OFF
FD-1001M_H-C ON OFF OFF OFF OFF OFF ON ON OFF OFF
FD-1001M_J-C ON OFF OFF OFF OFF OFF ON ON OFF OFF
c) Single Bin Control Models (BC1 Infrared Sensor Only)
Dip Switch No. 1 2 3 4 5 6 7 8 9 10
F-450MAJ(-C) ON OFF OFF OFF OFF OFF ON ON OFF OFF
F-801M_J(-C) ON OFF OFF OFF OFF OFF ON ON OFF OFF
F-1002M_J(-C) ON OFF OFF OFF OFF OFF ON ON OFF OFF
F-1501M_J(-C) ON OFF OFF OFF OFF OFF ON ON OFF OFF
F-2001M_J(-C) ON OFF OFF OFF OFF OFF ON ON OFF OFF
FD-650M_H-C ON OFF OFF OFF OFF OFF ON ON OFF OFF
FD-1002M_J-C ON OFF OFF OFF OFF OFF ON ON OFF OFF
Bin Control 1 (infrared sensor) Shutdown Delay
Continuous Dispensing Timer
(DCM models only, do not adjust on modular icemakers)
Drain Frequency Control
Bin Control Selector
Bin Control (BC or BC2) (mechanical stand-alone or backup) Shutdown Delay
Normally off (factory use)
Loading ...
Loading ...
Loading ...