Loading ...
Loading ...
Loading ...
Owner’s Manual 41
Troubleshooting
Condition/Problem Things to Check Solution
Speed displayed is not
accurate
Check Speed Sensor Magnet
position
Speed Sensor Magnet should be in place on Flywheel.
Speed displayed is always
“0”
Data cable Make sure the data cable is connected to the Console from the
main frame assembly.
Speed Sensor Make sure the data cable is connected to the Speed Sensor.
No Speed/RPM reading Check data cable integrity All wires in cable should be intact. If any are cut or pinched,
replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly. Small
latch on connector should line up and snap into place.
Check Speed Sensor Assembly Speed Sensor Assembly should be connected to data cable.
Realign sensor if necessary. Replace if there is any damage to the
sensor or the connecting wire.
Resistance does not change
when Resistance Knob is
rotated during workout
Check data cable integrity All wires in cable should be intact. If any are visibly cut or pinched,
replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly. Small
latch on connector should line up and snap into place.
Check Console display
for damage
Check for visual sign that console display is cracked or otherwise
damaged. Replace Console if damaged.
If the above steps do not resolve the problem, contact Customer
Service (if inside US/Canada) or your local distributor (if outside
US/Canada).
Console displays “Base
Connect Error”
Data cable Make sure the data cable connection to the Console is firmly
seated.
Loading ...
Loading ...
Loading ...