Loading ...
Loading ...
Loading ...
13
Chapter 2 Installing Your Product
2.1 Plugging in Signals
Connect signals to the product (ensure all devices are powered off first). Tighten connector
screws/locks where provided.
2.2 Plugging in Main Power
Connect IEC cable to device and plug into wall socket. Turn on power at wall socket.
2.3 Turning on Your Product
When red light of [POWER] button is on, the device is standby.
Press [POWER] button for 3 seconds, the light will turn yellow and the device is starting up. After
10 seconds, the PVW monitor display the preview signals, as shown in the picture below:
Loading ...
Loading ...
Loading ...