Loading ...
Loading ...
Loading ...
88
Control
mode
PTZ controlling mode.
If Local is selected for PTZ type, configure this parameter.
Protocol
Select the PTZ protocol, including NONE, HDCVI3.0 and HDCCTV2.0.
If Local is selected for PTZ type, configure this parameter.
Address
Set the PTZ address.
If Local is selected for PTZ type, configure this parameter.
Baud Rate
The times of signal changes on the transmission line within one time unit.
The default baud rate is 115200 for a console.
The default baud rate is 9600 for a vehicle light box.
If Local is selected for PTZ type, configure this parameter.
Data bit
Select a data bit. The options include 5, 6, 7, and 8.
If Local is selected for PTZ type, configure this parameter.
Stop bit
Select a stop bit. The options include 1, 1.5, and 2.
If Local is selected for PTZ type, configure this parameter.
Parity
Select a parity mode from None, Odd, Even, Mark, and Null.
If Local is selected for PTZ type, configure this parameter.
Click OK.
Configuring Network Parameters
You can set the network parameters of the device as needed, including connections, Wi-Fi
parameters, cellular, email, auto register, and P2P.
5.6.1 Configuring Connection Settings
You can configure the maximum number of ports and their respective values.
Select SETTING > NETWORK > Port.
The Port interface is displayed.
Loading ...
Loading ...
Loading ...