Loading ...
Loading ...
Loading ...
4
No. Name Descriptions of interfaces and indicators
2
Lock switch (Device
switch)
To plug or unplug the SD card, the Device must be unlocked.
In this case, the Device will shut down automatically if
powered on.
To protect SD card, the Device cannot be powered on if
unlocked. Lock the Device before powering on.
3 SD card interface Supports two SD cards.
4 PWR
The red light is always on when the Device is powered on, and off
when the Device is powered off
5 REC
Recording status indicator. The blue light is always on when
recording, and off when not
6 IR Receives infrared signal from remote control.
2.2.2 Rear Panel
Describes the interface functions of the rear panel.
Figure 2-2 shows the rear panel of the Device. Refer to Table 2-2 for interface function description,
and “2.2.3Port Description” for interface definitions.
Rear Panel
Table 2-2 Descriptions of rear panel interfaces
No. Name Function
1
Wi-Fi antenna
port
Connects to Wi-Fi antenna and receives Wi-Fi signals.
This function is supported on the Device with Wi-Fi module.
2 4G antenna port
Connects to 4G antenna for receiving 4G signals.
This function is supported on the Device with 4G modules.
3
Positioning
antenna port
Connects with positioning antenna for receiving satellite positioning
signals
This function is supported on the Device with positioning module
Loading ...
Loading ...
Loading ...