Loading ...
Loading ...
Loading ...
53
Region setting
2) Select a region and name it.
The higher the sensitivity value is, the easier the motion detect is triggered; the lower
the threshold is, the easier the motion detect is triggered. By default, the whole video
image is for motion detect.
Each color represents a separate region, and you can set different motion detect
regions.
3) Hold down the left button of the mouse, drag to select the region to be detected, and
set up its sensitivity and threshold value.
Channel alarm events: As long as any one of the four regions triggers alarm, the
channel that houses the region will give alarm.
4) Click OK.
Configure alarm linkage parameters.
Table 5-1 Alarm linkage parameters
Parameter Description
Delay When an alarm ends, the alarm recording will stop after a period of delay.
Alarm output
Connect with an alarm device (such as an alarm light or siren) on the alarm output
interface, click Setting to set the alarm output device, and activate the alarm
linkage output port. When an alarm event takes place, the system can trigger
corresponding alarm output devices.
Latch
Click Setting under Alarm Out to set the latch.
Set a length of time during which the device continues alarm output after the
alarm ends.
Loading ...
Loading ...
Loading ...