Loading ...
Loading ...
Loading ...
en Cleaning and servicing
54
11.2 Using SensorControl
Plus
You can find out here how to select
and start an automatic programme.
Requirements
¡ The bowl has been inserted.
¡ The bowl lid is fitted.
1. Insert the appropriate tool:
‒ Beating whisk for whipping
cream and egg whites
‒ Kneading hook for yeast dough
2. Insert mains plug.
a The display shows "OptiMUM".
3. Press
.
a The display shows "CREAM".
4. Use
, or to select the re-
quired programme, e.g. "EGG
WHITE".
a The scales will be calibrated.
a The display shows "- - - - -".
5. Wait for calibration to finish.
a The display shows "0g" or
"0.00lb".
6. Add the relevant ingredient to the
bowl, e.g. egg whites.
a The display shows the weight.
7. Note:On appliances without any
scales, the display shows "ADD IN-
GREDIENTS" after selection of the
programme.
Add the measured ingredients to
the bowl.
8. Wait a short time after adding
them.
a The display shows "HOLD
ROTARY SWITCH ON M/A 2s".
9. Press the release button and push
the swivel arm down until it en-
gages.
10.Set the rotary switch to
and
hold for at least 2seconds.
11.Release the rotary switch.
a The rotary switch stops at
.
a The display shows "SENSOR CON-
TROL PLUS" and the automatic
programme is running.
a When the preprogrammed result
has been achieved, the display
shows "FINISH".
a The rotary switch jumps to
and
processing ends.
Tip:If the result is not what you want,
you can continue processing cream
and egg whites to the consistency re-
quired using speed7 or yeast dough
using speed3.
12 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
12.1 Cleaning products
Find out here which cleaning
products are suitable for your appli-
ance.
ATTENTION!
Using unsuitable cleaning agents or
incorrect cleaning may damage the
appliance.
▶ Do not use cleaning agents con-
taining alcohol or spirits.
▶ Do not use sharp, pointed or metal
objects.
▶ Do not use abrasive cloths or
cleaning agents.
▶ Only clean the control panel and
the display using a damp mi-
crofibre cloth.
Loading ...
Loading ...
Loading ...