Loading ...
Loading ...
Loading ...
en first time
46
The appliance is switched on again
after a power failure. Processing can-
not start again until the rotary switch
has been set to .
Overload protection
The overload protection system pre-
vents the motor and other compon-
ents from being damaged through
being overloaded.
The motor will switch off if
¡ too large a quantity is processed.
¡ processing is taking too long.
¡ a tool or accessory is blocked.
Swivel arm protection device
The swivel arm protection device pre-
vents the swivel arm from being
opened if an accessory is attached to
the rear drive.
first time
6 Before using for the
first time
first time
Prepare the appliance for use.
6.1 Preparing the appliance
1. Press the release button and raise
the swivel arm until it engages.
→"Opening swivel arm", Page47
2. Turn the bowl clockwise and re-
move.
→"Removing bowl", Page47
3. Clean all parts that come into con-
tact with food before using for the
first time.
→"Cleaning and servicing",
Page54
4. Put the cleaned and dried parts
out ready for use.
operation
7 Basic operation
operation
7.1 Cable length
Adjust the length of the power cable
to your needs.
Adjusting cable length via cable
storage compartment
1
1. Pull the power cable out to the re-
quired length.
2. To shorten the cable, push it into
the cable storage compartment.
Adjusting cable length via cable
rewinder
1
1. Pull the power cable out to the re-
quired length and slowly let go.
2. To shorten the cable,
‒ pull the cable,
‒ allow the cable to wind up,
‒ pull the cable out again.
Note:Do not push the cable in by
hand. If the cable jams, pull right out
and let it wind up again.
7.2 Swivel arm positions
You can find an overview of the posi-
tions of the swivel arm here.
Posi-
tion
Use
Posi-
tion1
Swivel arm is closed.
¡ Process ingredients with
tools.
¡ Use accessory on main
drive, e.g. Meat mincer.
¡ Use accessory on drive
2, e.g. Continuous feed
shredder
1
Depending on the appliance specifications
Loading ...
Loading ...
Loading ...