Loading ...
Loading ...
Loading ...
Connecting to a Wired (Ethernet) Network
156
Connecting to a Wired (Ethernet) Network
Connect the camera to a router or other device connected to a wired (Ethernet) network using a commercially
available Ethernet cable. Use Category 5e, shielded twisted pair (STP) Ethernet cables compatible with Gigabit
Ethernet (1000BASE-T) and with good shielding capability.
1 Connect a commercially available Ethernet cable to the (Ethernet) terminal on the camera and an
Ethernet port on a network device.
2 Open the connection method selection submenu.
> [ ! Network Settings] > [Connection Settings] > select the desired configuration number* >
[Edit]
* You can save up to 4 network configuration profiles in the camera. Push the joystick up/down to select the configuration number.
3 Select [Ethernet] and then press the joystick.
4 Continue with the procedure to configure the IP address assignment (A 151).
(Ethernet) access indicator
Ethernet cable
(commercially available)
Ethernet port on a
network device
Loading ...
Loading ...
Loading ...