Loading ...
Loading ...
Loading ...
68
Stopping embroidering
The machine can be stopped during embroidering.
Temporarily pausing
a
Press the “Start/Stop” button.
The machine stops and the “Start/Stop” button lights
up in red.
• Embroidering can also be stopped by touching an
area displaying the pattern.
• The thread is not trimmed.
• To continue embroidering, after checking that the
upper thread is taut, touch , and then
press the “Start/Stop” button.
Temporarily pausing for extended periods of
time
a
Press the “Start/Stop” button.
The machine stops and the “Start/Stop” button lights
up in red.
• The thread is not trimmed.
b
Touch to unlock the machine.
c
Press the thread trimming button.
The bobbin and upper threads are trimmed.
• Before turning off the machine, be sure to trim the
threads.
d
Set the main power switch to “O” to turn off the
machine.
The display and the “Start/Stop” button indicator go
off.
• Embroidery can resume after the machine is turned on
again. Back up several stitches to overlap the
stitching. (page 71)
If the thread breaks while embroidering
If a problem occurs while embroidering, such as if the
thread breaks, the machine stops automatically.
Re-thread the broken thread, back up several stitches, and
then continue embroidering. (page 69)
a
With both hands, grab the left and right sides of the
arms of the Embroidery Frame Holder, and then
slightly lift up the frame.
The pins on the arms of the Embroidery Frame Holder
should come out of the holes in the sides of embroidery
frame.
b
Pull off the embroidery frame toward you.
Remove the fabric from the frame.
REMOVING THE EMBROIDERY
FRAME
CAUTION
• When removing the embroidery frame, make
sure that the “Start/Stop” button is lit in red. If
the “Start/Stop” button is flashing in green,
the machine may start embroidering. If the
machine accidentally starts operating, injuries
may result.
IMPORTANT
• When removing the embroidery frame, be
careful that the embroidery frame does not hit
any other part of the machine.
• Do not lift up the Embroidery Frame Holder
with extreme force, otherwise it may be
damaged.
Loading ...
Loading ...
Loading ...