Loading ...
Loading ...
Loading ...
106
If the machine does not respond when a key
is touched
If nothing happens when a key on the screen is touched (no
key can be selected or the keys are misaligned), adjust the
touch panel as described below.
a
Touch anywhere inside the touch panel, and turn the
machine off, then on again.
• Continue touching the touch panel until the screen
shown below appears.
• The “Start/Stop” button is red.
The adjustments screen appears.
b
Use the included touch pen to touch the center of the
numbered crosses on the screen, in numerical order
from 1 to 5.
c
After making the necessary touch panel adjustment,
[OK] will show on the screen.
• If the buzzer sounds when cross number 5 is touched,
an error occurred during setting, and [NG] appears on
the screen. Carefully touch the crosses again, starting
from 1 to 5.
d
Turn the machine off, and on again.
IMPORTANT
• Be sure to use the included touch pen to adjust
the touch panel. Do not use a mechanical
pencil, screwdriver or any other hard or sharp
object. Do not apply pressure to the LCD
screen display, otherwise damage to the
display may result.
Note
• If the keys still do not respond, even after the touch
panel is adjusted, or if the touch panel cannot be
adjusted, contact your nearest authorized Brother
dealer.
Loading ...
Loading ...
Loading ...