Brother PR1X Operation Manual

Loading ...

GETTING READY

 Page 3

1 Turn both the upper and bobbin thread sensors [ON] or

[OFF]. If it is turned [OFF], the machine can be used

without upper thread.

2 The volume of operation sounds and alarm sounds can

be adjusted.

3 Select to save the machine power by setting the [Eco

Mode] or the [Shutoff Support Mode]. (page 22)

4 The machine can be set so that the opening screen is

either displayed ([ON]) or not displayed ([OFF]) when the

machine is turned on.

5 Select the display language. The keys and messages

appear in the selected language.

 Page 4

1 The light can be set to be turned either [ON] or [OFF].

2 Change the screen display brightness.

3 Set [Embroidery Crosshair Positioning Laser] to [ON] or

[OFF].

4 Set the brightness of the Embroidery Crosshair

Positioning Laser. (page 60)

 Page 5

1 [Total Count] shows the total number of stitches

embroidered, and [Service Count] show the number of

stitches that have been embroidered since the

machine’s last maintenance.

2 [Total Time] shows the total amount of time that the

machine has been used, and [Trip Time] shows the

amount of time that the machine has been used since its

last maintenance.

* Use counters 1 and 2 as a standard for performing

periodic maintenance and for scheduling professional

maintenance for the machine.

3 Shows the internal machine number for this machine.

4 Shows the version of the software installed on this

machine.

5 Return all data and settings saved in the machine to the

factory defaults. (page 98)

Loading ...

Brother PR1X Entrepreneur One Single-Needle Embroidery Machine