Loading ...
Loading ...
Loading ...
GETTING READY
15
1
For included accessories of your machine, refer to the
additional sheet “Included Accessories”.
Setup and transporting precautions
INCLUDED ACCESSORIES SETTING UP THE MACHINE
CAUTION
• The transporting or setting up of the machine
should be performed by two people. When
transporting the machine, be sure to have two
people lift the machine from the bottom at the
indicated slots (1). Lifting the machine from
any other area may damage the machine or
result in the machine falling, which could
cause injuries.
• Do not plug in the power supply cord until
setup of the machine is completed, otherwise
injuries may result if the “Start/Stop” button is
accidentally pressed and the machine starts
embroidering.
• When lubricating the machine, wear protective
eyeglasses and gloves to prevent the oil or
grease from getting into your eyes or on your
skin. Do not put the oil or grease into your
mouth. Keep the oil and grease out of the reach
of children.
• In order to prevent malfunctions or damage,
do not set up the machine in a location
exposed to the following conditions.
- Liquids, such as water
-Extreme dust
- Direct sunlight
- Extremely high or extremely low
temperatures. The operating environment
should be between 5 °C (40 °F) and 40 °C
(104°F).
- Insufficient space (page 16, page 107)
- Objects within the moving range of the
embroidery frame
- Blocked ventilation slots at the back and on
the rear underside of the machine
- An unstable surface
Loading ...
Loading ...
Loading ...