Loading ...
Loading ...
Loading ...
BASIC EMBROIDERY
67
2
Now, the machine is ready to begin embroidering.
When the machine starts embroidering, the presser foot is
automatically lowered, the necessary thread trimming
operations at the beginning of stitching and at the end of
stitching are performed, the threads are changed as
necessary while the embroidery is performed, and the
machine stops when the end of the stitching is reached.
Starting embroidering
a
Touch to unlock the machine.
1 The thread color being used for embroidering or will
soon be used for embroidering appears at the top of the
thread color sequence display. The remaining thread
colors are listed in the embroidering order, starting from
the top.
The “Start/Stop” button changes from lit in red
(locked machine) to flashing in green (unlocked
machine), and the machine is ready to begin
embroidering.
• If the “Start/Stop” button is not pressed within 10
seconds after unlocking the machine, the machine
becomes locked again.
b
Press the “Start/Stop” button.
Press the “Start/Stop” button while it is flashing in green.
If the “Start/Stop” button returns to being lit in red,
perform this procedure again from step
a.
The “Start/Stop” button lights up in green and begins
embroidering the first color.
• While the machine is embroidering, the point being
embroidered is indicated by the green cross hairs in
the pattern display area. In addition, the number of
stitches and the time count up.
c
After embroidery of the first color is finished, the
machine automatically stops and trims the thread.
d
Unthread the first color from the machine.
e
Thread the machine with the second color and then
repeat the same steps for embroidering the second
color. This continues until the last color is
embroidered, and the machine automatically stops.
The “Start/Stop” button lights up in red.
• No thread trimming operations at the beginning of
stitching and at the end of stitching are necessary.
Continuing embroidering
To select a new pattern, touch .
The pattern type selection screen appears.
PERFORMING THE EMBROIDERY
CAUTION
• While the machine is in operation, pay special
attention to the needle location. In addition,
keep your hands away from all moving parts
such as the needle, thread take-up lever and
carriage, otherwise injuries may result.
IMPORTANT
• When embroidering overlapping stitches, it is
difficult for the needle to penetrate the fabric,
possibly resulting in the needle bending or
breaking.
Note
• Make sure that there are no objects within the
moving area of the embroidery frame. If the
embroidery frame hits another object, the pattern
may become misaligned.
• When embroidering large pieces of fabric, make
sure that the fabric is not caught in the carriage.
1
Loading ...
Loading ...
Loading ...