Loading ...
Loading ...
Loading ...
STARTING AND OPERATING 77
The Dynamic Selector consists of the following positions:
Auto Mode – This mode is designed for comfort and safety
in normal driving conditions. In versions equipped with
All-Wheel Drive, this mode also reduces fuel consumption
by automatically altering the distribution of torque
between the front and rear axle.
All Weather Mode – This mode offers increased traction
control and stability control for low traction conditions
such as driving on a dirt road or off-road as well as wet and
slippery roads.
Sport Mode – This mode is designed to increase steering
feedback to the driver with a slight increase in effort and
changes the transmission shift schedules for more
aggressive shifting. This driving mode is useful while
driving on twisty roads where more steering precision is
desired in spirited cornering.
WARNING MESSAGES
In the event of a system fault, the system automatically
defaults to “Auto” mode and a message will appear in the
instrument cluster display.
For further information
Ú page 53.
ELECTRIC POWER STEERING
The electric power steering system will provide increased
vehicle response and ease of maneuverability. The power
steering system adapts to different driving conditions.
If the “SERVICE POWER STEERING” OR “POWER
STEERING ASSIST OFF - SERVICE SYSTEM” message and
a steering wheel icon are displayed on the instrument
cluster screen, it indicates that the vehicle needs to be
taken to the dealer for service. It is likely the vehicle has
lost power steering assistance
Ú page 53.
NOTE:
Even if the power steering assistance is no longer oper-
ational, it is still possible to steer the vehicle. Under
these conditions there will be a substantial increase in
steering effort, especially at low speeds and during
parking maneuvers.
If the condition persists, see an authorized dealer for
service.
STOP/START SYSTEM
The Stop/Start function was designed to reduce fuel
consumption. The system will stop the engine
automatically during a vehicle stop if the required
conditions are met. Releasing the brake pedal or pressing
the accelerator pedal will automatically restart the engine.
AUTOMATIC MODE
The Stop/Start feature is enabled after every normal
customer engine start. At that time, the system will go into
STOP/START READY and if all other conditions are met,
can go into a STOP/START AUTOSTOP ACTIVE “Autostop”
mode.
To Activate The Autostop Mode, The Following Must Occur:
The system must be in STOP/START READY state.
A STOP/START READY message will be displayed in the
instrument cluster display within the Stop/Start
section
Ú page 53.
The vehicle must be completely stopped.
The gear selector must be in a forward gear and the
brake pedal pressed.
The engine will shut down, the tachometer will move to the
zero position and the Stop/Start telltale will illuminate
indicating you are in Autostop. Customer settings will be
maintained upon return to an engine running condition.
WARNING!
Continued operation with reduced assist could pose a
safety risk to yourself and others. Service should be
obtained as soon as possible.
4
23_FD_OM_EN_USC_t.book Page 77
Loading ...
Loading ...
Loading ...