Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 35
REAR WINDOW WIPER/WASHER
The rear wiper/washer controls are located on the
windshield wiper lever on the right side of the steering
column. The rear wiper/washer is operated by rotating a
switch, located at the middle of the lever.
NOTE:
If the front wipers are moving and the vehicle is shifted in
REVERSE, the rear wiper will perform one round up to
clean the rear window.
Rotate the center portion of the lever upward to
the first detent for intermittent operation and to
the second detent for continuous rear wiper
operation.
To use the washer, push the lever forward and
hold while spray is desired. If the lever is
pushed while in the intermittent setting, the
wiper will turn on and operate for several wipe
cycles after the end of the lever is released, and then
resume the intermittent interval previously selected.
NOTE:
As a protective measure, the pump will stop if the switch
is held for more than 30 seconds. Once the lever is
released, the pump will resume normal operation.
If the lever is pushed while the wiper is in the off position,
the wiper will operate for several wipe cycles, then turn off.
If the rear wiper is operating when the ignition is placed in
the OFF position, the wiper will automatically return to the
parked position.
WINDSHIELD WIPER DE-ICER —
I
F EQUIPPED
Your vehicle may be equipped with a Windshield Wiper
De-Icer feature that may be activated under the following
conditions:
Activation By Rear Defrost — The Windshield Wiper
De-Icer will be activated automatically when the rear
defrost is turned on and the ambient temperature is
below 40°F (4.4°C).
Activation By Remote Start Operation — When Remote
Start is active and the outside ambient temperature is
less than 40°F (4.4°C), the Windshield Wiper De-Icer
will activate. Exiting Remote Start will resume its
previous operation. If the Windshield Wiper De-Icer was
active, the timer and operation will continue.
CLIMATE CONTROLS
The Climate Control system allows you to regulate the
temperature, air flow, and direction of air circulating
throughout the vehicle. The controls are located on the
touchscreen and on the instrument panel below the radio.
AUTOMATIC CLIMATE CONTROL
D
ESCRIPTIONS AND FUNCTIONS —
I
F EQUIPPED
Automatic Climate Controls
MAX A/C Setting
MAX A/C sets the system for maximum cooling
performance. Rotate the driver temperature
control adjust knob counterclockwise for
MAX A/C. Both driver and passenger temperature
displays will show MAX A/C LO. In MAX A/C, the blower speed
and mode position can be adjusted to desired user settings.
Pressing other settings will cause the MAX A/C operation to
switch to the selected setting and MAX A/C to exit.
CAUTION!
Failure to follow these cautions can cause damage to
the heating elements:
Use care when washing the inside of the rear
window. Do not use abrasive window cleaners on the
interior surface of the window. Use a soft cloth and a
mild washing solution, wiping parallel to the heating
elements. Labels can be peeled off after soaking
with warm water.
Do not use scrapers, sharp instruments, or abrasive
window cleaners on the interior surface of the
window.
Keep all objects a safe distance from the window.
2
23_FD_OM_EN_USC_t.book Page 35
Loading ...
Loading ...
Loading ...