Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR INSTRUMENT PANEL 65
Stop/Start Active Indicator Light —
If Equipped
This indicator light will illuminate when the
Stop/Start function is in “Autostop” mode.
Turn Signal Indicator Lights
When the left or right turn signal is activated,
the turn signal indicator will flash
independently and the corresponding exterior
turn signal lamps will flash. Turn signals can
be activated when the multifunction lever is moved
down (left) or up (right).
NOTE:
A continuous chime will sound if the vehicle is driven
more than 1 mile (1.6 km) with either turn signal on.
Check for an inoperative outside light bulb if either indi-
cator flashes at a rapid rate.
Sport Mode Indicator Light
This light will turn on when Sport mode is
active.
WHITE INDICATOR LIGHTS
LaneSense Indicator Light — If Equipped
When the LaneSense system is ON, but not
armed, the LaneSense indicator light
illuminates solid white. This occurs when only
left, right, or neither lane line has been
detected. If a single lane line is detected, the system is
ready to provide only visual warnings if an unintentional
lane departure occurs on the detected lane line
Ú page 92.
Light Sensor Failure Indicator Light
This light illuminates when there is light sensor
failure. If this light illuminates, have an
authorized dealer inspect it.
Speed Warning Indicator Light —
If Equipped
The indicator light will illuminate white along
with a notification text message (Speed
Warning Set to XX followed by unit). When the
set speed is exceeded, a single chime will
sound along with pop-up message of “Speed Warning
Exceeded.” Speed Warning can be turned on and off in the
instrument cluster display.
The number “55” is only an example of a speed that can
be set.
Idle Coasting Indicator Light
The Idle Coasting feature works by allowing
engine speeds to drop to idle, saving fuel. This
feature is a menu option. The indicator is only
seen when Idle Coasting is chosen and active.
BLUE INDICATOR LIGHTS
High Beam Indicator Light
This indicator light will illuminate to indicate
that the high beam headlights are on. With the
low beams activated, push the multifunction
lever forward (toward the front of the vehicle) to
turn on the high beams. Pull the multifunction lever
rearward (toward the rear of the vehicle) to turn off the
high beams. If the high beams are off, pull the lever toward
you for a temporary high beam on, "flash to pass"
scenario.
GRAY INDICATOR LIGHTS
Cruise Control Ready/Canceled Indicator
Light
This light will turn on when the cruise control
has been turned on, but not set, or canceled by
the driver
Ú page 79.
3
23_FD_OM_EN_USC_t.book Page 65
Loading ...
Loading ...
Loading ...