Loading ...
Loading ...
Loading ...
54 GETTING TO KNOW YOUR INSTRUMENT PANEL
INSTRUMENT CLUSTER DISPLAY
C
ONTROL BUTTONS
The system allows the driver to select information by
pushing the following buttons mounted on the steering
wheel:
Instrument Cluster Display Control Buttons
The instrument cluster display features a driver interactive
display that is located in the instrument cluster. Pushing
the controls on the left side of the steering wheel allows
the driver to select vehicle information and Personal
Settings.
Push the back/left arrow button to access the infor-
mation screens or submenu screens of a main menu
item.
Push the
up arrow button to scroll upward through
the main menus and submenus (Speedometer, Trip,
Drive Mode Selector, Vehicle Info, Driver Assist, Audio,
Phone, Navigation, Messages, Settings).
Push the
right arrow button to access the informa-
tion screens or submenu screens of a main menu item.
Push the
down arrow button to scroll downward
through the main menu and submenus (Speedometer,
Trip, Drive Mode Selector, Vehicle Info, Driver Assist,
Audio, Phone, Navigation, Messages, Settings).
Push the
OK button to access/select the information
screens or submenu screens of a main menu item.
Push and hold the
OK button for two seconds to reset
displayed/selected features that can be reset.
ENGINE OIL CHANGE RESET —
I
F EQUIPPED
Use this QR code to access your digital
experience.
Your vehicle may be equipped with an
engine oil change indicator system.
The “Change Engine Oil” message will
display in the instrument cluster
display. The engine oil change indicator
system is duty cycle based, which
means the engine oil change interval may fluctuate,
dependent upon your personal driving style.
Unless reset, this message will continue to display each
time you turn the ignition switch to the ON/RUN position.
To reset the oil change indicator system (after performing
the scheduled maintenance), refer to the following
procedure.
1. Turn the ignition switch to the ON position (do not
start the engine).
2. Fully push the accelerator pedal slowly, three times,
within 10 seconds.
3. Turn the ignition switch to the OFF position.
NOTE:
If the indicator message illuminates when you start the
vehicle, the oil change indicator system did not reset.
If necessary, repeat this procedure.
1 — Left Arrow Button
2 — Up Arrow Button
3 — Right Arrow Button
4 — Down Arrow Button
5 — OK Button
23_FD_OM_EN_USC_t.book Page 54
Loading ...
Loading ...
Loading ...