Loading ...
Loading ...
Loading ...
51
Figure 2-49 FTP
Step 2 Configure the parameters.
Table 2-30 FTP configuration parameter description
Parameter Description
ANR
When the network disconnects or fails, snapshots will be stored in TF
card. After the network is restored, the snapshots will be uploaded from
the TF card to FTP or client.
Make sure that TF card is inserted in the camera; otherwise, the offline
transfer function cannot be enabled.
Picture Name
Settings
Set the naming rule of snapshots to be saved in FTP server. You can click
Help…
to view the naming rule, or click
Reset
to restore the default
naming rule.
Enable Enable FTP server storage.
Protocol
●
SFTP (Recommended)
: Secure File Transfer Protocol, a network
protocol allows file access, and transfer over a secure data stream.
●
FTP
: File Transfer Protocol, a network protocol implemented to
exchange files over a TCP/IP network. Anonymous user access is also
available through an FTP server.
Server IP The IP address of FTP server.
Encode Type
Refers to the encode mode of Chinese characters when naming pictures.
Two modes are available:
UTF-8
, and
GB2312
. After configuring
Server
IP
, and
Port
, click
test
to check whether the FTP server works.
Port The port number of FTP server.
Username
The username, and password of FTP server.
Password
Upload Picture Select the types of pictures to be uploaded to the FTP server.
Step 3 Click
Save
.
Loading ...
Loading ...
Loading ...