Loading ...
Loading ...
Loading ...
39
Parameter Description
Shutter
You can select the shutter value, or select
Customize
, and then set the
shutter range.
You need to set shutter when set
Mode
to
Manual
.
Shutter Scope
Set the time range for shutter.
You need to set shutter when
Customize
is set as
Shutter
.
Gain Scope
Set the value range for gain.
You need to set gain scope when set
Mode
to
Manual
.
WB
Mode Set a scene mode to adjust the image to its best status.
Step 3 Click
Save
.
2.5.2.1.3 Metering
This section provides guidance on setting the measure mode of metering zone.
Procedure
Step 1 Select
Setting
>
Camera
>
Image
>
Metering
.
Step 2 Configure the parameters.
Table 2-20 Parameter description
Parameter Description
Plate Light
When selecting
Enable
, you can turn
ON
or
OFF
backlighting
compensation, and frontlighting compensation according to scene
requirement, and then improve the image brightness in backlighting
situations.
Backlighting
Compensation
Frontlighting
Compensation
Metering Mode
●
Global Metering
: Measure the brightness of the whole image
area, and intelligently adjust the overall image brightness.
●
Partial Metering
: Measure the brightness of sensitive area, and
intelligently adjust the overall image brightness. If the measured
area becomes bright, then the whole area becomes dark, and
vice versa.
Step 3 Drag to select the measured area, and the system displays a yellow box. Drag the box to a
proper location.
Only need to draw measuring areas when setting
Metering Mode
to
Partial Metering
.
Step 4 Click
Save
.
Loading ...
Loading ...
Loading ...