Loading ...
Loading ...
Loading ...
43
to access videos through the multicast protocol.
Procedure
Step 1 Select
Setting
>
Network Settings
>
Multicast
.
Step 2 Select the checkbox of
Enable
to enable the function.
Step 3 Enable main stream or sub stream based on the actual situation and set IP address and
port number.
Step 4 Click
Save
.
2.5.3.6 Configuring Email
Configure the email, and when alarms or abnormal events are triggered, an email will be sent to the
recipient server through SMTP server. The recipient can log in to the incoming mail server to receive
emails.
After enabling this function, there is a risk of data leakage that the system will send the device data
to the given server.
Procedure
Step 1 Select
Setting
>
Network Settings
>
Email
.
Step 2 Select the checkbox of
Enable
, and then configure the parameters.
Table 2-24 Parameter description
Parameter Description
SMTP Server
IP address of the outgoing mail server that complies with SMTP
protocol.
Port
Port number of the outgoing mail server complying with SMTP
protocol. It is 25 by default.
Anonymity
For servers supporting anonymous email, you can log in anonymously
without entering username, password, and sender information.
Username
Username and password of the sender mailbox.
Password
Sender Email address of the sender.
Encryption Type Select encryption type from
None
,
SSL
, and
TLS
.
Subject
You can enter no more than 63 characters in English letters, and
numbers.
Receiver Email address of the receiver. Supports 3 addresses at most.
Attachment Select the checkbox to add attachments in the email.
Test Email
Test whether the email function is normal. If the configuration is
correct, the email address of the receiver will receive the test email.
Save the email configuration before running the rest.
Step 3 Click
Save
.
2.5.3.7 Configuring SNMP
Set SNMP and connect to the camera through tools such as MIB Builder and MG-SOFT MIB Browser,
Loading ...
Loading ...
Loading ...