Dahua ITC416-PL8I-IZ 4MP Access ANPR Camera

Smart ANPR Camera Web Operation Manual V1.0.0 - Page 52

For ITC416-PL8I-IZ.

PDF File Manual, 76 pages, Read Online | Download pdf file

ITC416-PL8I-IZ photo
Loading ...
Loading ...
Loading ...
44
and then you can manage and monitor the camera on the tool.
Prerequisites
Install a software for monitoring and managing SNMP (Simple Network Management Protocol)
device.
Get the corresponding version of MIB file from technical support.
Procedure
Step 1 Select
Setting
>
Network Settings
>
SNMP
.
Step 2 Select the version of SNMP to enable it.
V1
: The device can only process the information of version 1.
V2
: The device can only process the information of version 2.
V3
: Set the username, password and authentication type to enable safety verification
when the server accesses the device.
Step 3 Enter the IP address of the computer on which the MIB software is installed as
Trap
Address
, and leave other parameters as default.
Step 4 Click
Save
, and then you can view the device configurations through MIB software.
2.5.3.8 Configuring 802.1x
Procedure
Step 1 Select
Setting
>
Network Settings
>
802.1x
.
Step 2 Select the checkbox of
Enable
, and then configure the parameters.
Table 2-25 Parameters description
Module Parameter Description
Common
Parameter
Authentication
Mode
PEAP
: Ordinarily uses TLS only to authenticate the
server to the client, and only the sever is required to
have a public key certificate.
EAP-TLS
: Provides mutual authentication of client to
server, and server to client. Both the client, and the
server must be assigned a digital certificate signed by
a CA (Certificate Authority) that they both trust.
CA Certificate
Select the
CA Certificate
checkbox, and then click
Browse
to import the CA certificate to verify whether the switch is
valid.
PEAP
Username For PEAP method, user authentication is performed by
using password-based credentials (username, and
password).
Password
EAP-TLS
Client
Certificate
Click
Browse
to import the client certificate, and private
key files for authentication.
Private Key
Step 3 Click
Save
.
2.5.3.9 Configuring PPPoE
Connect to the network through PPPoE, and the device can automatically obtain a dynamic IP on
Loading ...
Loading ...
Loading ...