Loading ...
Loading ...
Loading ...
42
2.5.3.2 Configuring Port
You can set the maximum number, and value of the ports.
Procedure
Step 1 Select
Setting
>
Network Settings
>
Connection
>
Port
.
Step 2 Set the maximum number of connections of the camera, and then configure each port.
Step 3 Click
Save
.
2.5.3.3 Configuring DDNS
Prerequisites
Confirm the server type which supports domain name analysis.
●
After enabling DDNS, your device information might be collected by the third party servers.
●
When a user registers and logs in to the DDNS website, you can view all the connected device
information.
Procedure
Step 1 Select
Setting
>
Network Settings
>
DDNS
.
Step 2 Select
Type
to enable DDNS, and then enter the information of the server.
Interval
means the update interval of the connection between the server and the device.
Step 3 Click
Save
.
2.5.3.4 Configuring Register
Through auto registration, when the device is connected from external network, the system will
report its current location to the server so that the client platform can access the device through
server.
Procedure
Step 1 Select
Setting
>
Network Settings
>
Register
.
Step 2 Check
On
to enable the function.
Step 3 Configure the parameters.
Table 2-23 Parameter description
Parameter Description
IP Address The IP address of the server on which the device registers.
Port The port of the server for auto registration.
Sub-Device ID
The device ID distributed by the server for auto registration. Make
sure that the ID is unique during auto registration.
Step 4 Click
Save
.
2.5.3.5 Configuring Multicast
When multiple users preview the video of the same device, unavailability might happen due to
network bandwidth restriction. You can fix it by setting up a multicast IP (224.0.0.0–239.255.255.255)
Loading ...
Loading ...
Loading ...