Loading ...
Loading ...
Loading ...
12
Icons Name Description
Record Type
Select the format of video recordings (
dav
by
default).
Talk
Click it, and then you can communicate with people
on site through the camera.
Manual Snapshot
Click to take a snapshot when a vehicle passes.
Snapshots are saved on the storage path.
●
Enable
ANPR Receive
first.
●
To change the storage path of snapshots, go to
Setting
>
Storage
>
Destination
>
Save Path
.
Digital Zoom
Drag to select an area in the video, and then the
area will be zoomed in. Right-click anywhere on the
video, or click to exit.
Video Recording
Click it to start recording. Click again to stop
recording. You can set the storage path of video
recordings in
Setting
>
Storage
>
Destination
>
Save Path
.
Config (LPR)
You can draw the area of plate detection, adjust
camera’s focal length, and set applicable regions.
Procedure
Step 1 Click to configure LPR.
Figure 2-13 Config (LPR)
Step 2 Set the focus and zoom mode, which is used to recognize vehicle.
Table 2-7 Focus parameter description
Parameter Description
Auto Focus Auto adjust camera lens, and make the scenario clearly focused.
Regional
Click
Regional
, and then draw a box in the video image to focus the
defined region in the box.
Loading ...
Loading ...
Loading ...