Loading ...
Loading ...
Loading ...
41
Table 2-22 Parameters description
Parameter Description
Snapshot Type Only supports general snapshot currently.
Resolution The snapshot resolution.
Size It is in accordance with resolution value.
Quality Set the snapshot quality which includes 6 levels optional.
Size
Select a coding size, or select
Custom
to define the size (50–1024).
You can only select one between picture quality and picture coding size to
set the configuration.
Step 3 Click
Save
.
2.5.2.2.3 ROI
Set one or more interested areas in the image, and then the areas will be in the configured quality.
●
It supports up to 3 areas at the same time.
●
The image quality is displayed by level:
Worst, Worse, Bad, Good Better,
or
Best
.
●
Click
Clear
, and delete all the area boxes; Select one box, and then click
Delete
or right-click to
delete it.
Procedure
Step 1 Select
Setting
>
Camera
>
Video
>
ROI
.
Step 2 Draw a rectangle on the video image as the interested area.
You can adjust the image quality, clear all drawn areas or delete them one by one through
clicking
Delete
or right-click the area.
Step 3 Click
Save
.
2.5.3 Network Settings
You can set IP address, port, and other parameters.
2.5.3.1 Configuring TCP/IP
Configure the IP address of the camera, and DNS server so that the camera can connect with other
devices in the same network.
Some models support dual network port. Do not set them in the same network segment; otherwise
it might cause network error.
Procedure
Step 1 Select
Setting
>
Network Settings
>
TCP/IP
.
Step 2 Configure parameters based on the actual situation.
Step 3 Click
Save
.
Loading ...
Loading ...
Loading ...