Loading ...
Loading ...
Loading ...
4
Browsers that do not support plug-in might have trouble displaying certain videos and images, or
downloading data in batches. The camera reminds you when that happens.
Figure 2-1 Reminder
2.1.2 Device Initialization
The camera is delivered uninitialized by default. You need to initialize it, and change its password
before further operations. Before initialization, make sure that both PC IP, and device IP are on the
same network segment, otherwise you might fail to go to the initialization page.
Procedure
Step 1 Set the IP address, subnet mask, and gateway of PC and device respectively.
●
If there is no router in the network, distribute IP address of the same segment.
●
If there is router in the network, configure the corresponding gateway, and subnet
mask.
●
The IP address is 192.168.1.108 by default.
Step 2 Ping the IP address of the camera to check whether network is connected.
Step 3 Go to the IP address of the camera in a browser.
Step 4 Enter and confirm the password.
●
The new password must consist of 8 to 32 characters, and contain at least two types
from upper case, lower case, number, and special characters (excluding ' " ; :, and &).
●
If you want to change your password again, go to
Setting
>
System
>
Account
>
Account
.
Step 5 Select the
Email Address
checkbox, and then enter your email address (recommended to
set for resetting your password).
Step 6 Click
Confirm
.
Loading ...
Loading ...
Loading ...